Papers

Año 2024

• Naderi, R., Bautista, A., Shañay, S., and Velasco, F. «Licorice (Glycyrrhiza glabra) as corrosion inhibitor of carbon steel reinforcing bars in mortar and its synergic effect with nitrite» Journal of Industrial and Engineering Chemistry, (2024), 129, pp. 620–633
• Fernández-Álvarez, M., Velasco, F., de la Fuente, D., and Bautista, A. «Powder organic coatings functionalized with calcium ion-exchanged silica corrosion inhibitors» Surface and Coatings Technology, (2024), 477, 130377
• Ramón-Álvarez, I., Sánchez-Delgado, S., Torres-Carrasco, M. «Viability of hybrid and alkali-activated slag materials for thermal energy storage: analysis of the evolution of mechanical and thermal properties» Journal of Building Engineering, 2024, 95, 110073.
• S. Shagñay, A. Bautista, M. Torres-Carrasco, F. Velasco, «Corrosion of ribbed carbon steels in ecological mortars and its influence on their rotative fatigue behavior«, Construction and Building Materials, (2024), 426, 136055.
• Gaitero, Juan J., Prabhu, Achutha,. Hochstein, Daniel., Mohammadi-Firouz, Reza., Ouellet-Plamondon, Claudiane., Bendouma, Mathieu., Snoeck, Didier., Ramón-Álvarez, Irene., Sánchez-Delgado, Sergio., Torres-Carrasco, Manuel., Dolado, Jorge S. «Reviewing experimental studies on sensible thermal energy storage in cementitious composites: report of the RILEM TC 299-TES«, Materials and Structures, (2024), 57.
• Ramón-Álvarez, I., Shagñay, S., Serrano, D., Caggiano, A., Sánchez-Delgado, S., and Torres-Carrasco, M. «Manufacturing and performance of eco-efficient cementitious blocks for thermal cycling in thermal energy storage«, Case Studies in Thermal Engineering, (2024), 61, 104947.

Año 2023

• I. Ramón-Álvarez, E. Batuecas, S. Sánchez-Delgado and M. Torres-Carrasco, «Mechanical performance after high-temperature exposure and Life Cycle Assessment (LCA) according to unit of stored energy of alternative mortars to Portland cement«, Construction and Building Materials, 365 (2023) 130082.
• S. Shagñay, I. García-Lodeiro, F. Velasco, A. Bautista and M. Torres-Carrasco, «Mineralogical and microstructural changes in alkali-activated and hybrid materials exposed to accelerated leaching«, Journal of Building Engineering 64, 2023, 105733.
• I. Ramón-Álvarez, S. Sánchez-Delgado, I. Peralta, A. Caggiano and M. Torres-Carrasco, «Experimental and computational optimization of eco-friendly mortar blocks for high temperature thermal energy storage of concentrated solar power plants«, Journal of Energy Storage (2023), 71, 108076.
• S. Shagñay, A. Bautista, F. Velasco, and M. Torres-Carrasco, «Carbonation of alkali-activated and hybrid mortars manufactured from slag: Confocal Raman Microscopy study and impact on wear performance«, Boletín de la Sociedad Española de Cerámica y Vidrio, (2023), 62(5), pp. 428-442.
• I. Ramón-Álvarez, Marugán-Cruz, C., Enríquez, E., S. Sánchez-Delgado and M. Torres-Carrasco, «Alkali-activated and hybrid materials: alternative to Portland cement as a storage media for solar thermal energy«, Boletín de la Sociedad Española de Cerámica y Vidrio, (2023), 62(2), pp. 160-173.
• S. Shagñay, A. Bautista, F. Velasco, I. Ramón-Álvarez and M. Torres-Carrasco, «Influence of the early-age length change of alkali-activated slag mortars on the corrosion of embedded steel«, Journal of Sustainable Cement-Based Materials, (2023), 13(1), pp. 178-195.
• I. Ramón-Álvarez, S. Sánchez-Delgado, I. Peralta, A. Caggiano and M. Torres-Carrasco, «Experimental Characterization and Modelling of Geopolymers and Hybrid Materials for Solar Thermal Energy«, RILEM Bookseries, (2023), 43, pp.1176-1188.
• Bautista, A., Sáez-Maderuelo, A., Monrrabal, G., …Halodová, P., Velasco, F. «Surface Characterization and Electrochemical Behavior of AISI 316l Stainless Steel Machined with Green Supercritical CO₂ Coolant» Journal of Materials Engineering and Performance, 2023.

Año 2022

• M. Fernández-Álvarez, C. Hijón-Montero, A. Bautista, F. Velasco and D. de la Fuente, «The effect of additions of anticorrosive pigments on the cathodic delamination and wear resistance of an epoxy powder coating«, Progress in Organic Coatings, 173, (2022), 107165.
• S. Shagñay, A. Bautista, F. Velasco and M. Torres-Carrasco, «Carbonation of alkali-activated and hybrid mortars manufacture from slag: Confocal Raman microscopy study and impact on wear performace«, Boletín de la Sociedad de Cerámica y Vidrio, 2022.
• R. Naderi, A. Bautista, F. Velasco, M. Soleimani, M. Pourfath, «Green corrosion inhibition for carbon steel reinforcement in chloride-polluted simulated concrete pore solution using Urtica Dioica extract«. Journal of Building Engineering, 58 (2022) 105055 .
• R. Churata, J. Almirón, M. Vargas, D. Tupayachy-Quispe, J. Torres-Almirón, Y. Ortiz-Valdivia, F. Velasco, «Study of Geopolymer Composites Based on Volcanic Ash, Fly Ash, Pozzolan, Metakaolin and Mining Tailing«. Buildings 12 (2022) 1118 .
• S. Shagñay, A. Bautista, J. Donaire, M. Torres-Carrasco, D.M. Bastidas, F. Velasco, «Chloride-induced corrosion of steel reinforcement in mortars manufactured with alternative environmentally-friendly binders«. Cement and Concrete Composites, 130 (2022), 104557.
• R. Naderi, A. Bautista, F. Velasco, M. Soleimani, M. Pourfath, «Use of licorice plant extract for controlling corrosion of steel rebar in chloride-polluted concrete pore solution«. Journal of Molecular Liquids, 346 (2022), 117856 .

Año 2021

• I. Ramón-Álvarez, C. Marugán, E. Enríquez, S. Sánchez-Delgado and M. Torres-Carrasco, «Alkali-activated and hybrid materials: alternative to Portland cement as a storage media for solar thermal energy«, Boletín de la Sociedad de Cerámica y Vidrio, 2021.
• M. Torres-Carrasco, E. Enríquez, L. Terrón-Menoyo, M.J. Cabrera, D. Muñoz, J. F. Fernández, «Improvement of thermal efficiency in cement mortars by using synthetic feldspars». Construction and Building Materials, 269 (2021) 121279.
• E. Enríquez, M. Torres-Carrasco, M.J. Cabrera, D. Muñoz, J. F. Fernández, «Towards More Sustainable Building Based on modified Portland Cements Through Partial Substitution by Engineered Feldspars». Construction and Building Materials, 269 (2021) 121334.
• M. Fernández-Álvarez, F. Velasco, A. Bautista, Performance of ultraviolet exposed epoxy powder coatings functionalized with silica by hot mixing, J. Mater. Res. Technol. 10 (2021) 1042–1057.
• J. Abenojar, M.A. Martinez, S. López de Armentia, E. Paz, J.C. del Real, F. Velasco. Mechanical Properties and Fire-Resistance of Composites with Marble Particles. Journal Material Research and Technology,12 (2021) 1403-1417.
• E. Paz, Y. Ballesteros, J. Abenojar, N. Dunne, J.C del Real. Advanced G-MPS-PMMA Bone Cements: Influence of Graphene Silanisation on Fatigue Performance,Thermal Properties and Biocompatibility. Nanomaterials, 11 (2021) 139.
• P.M. Carmona-Quiroga, C. Mota-Heredia, M. Torres-Carrasco, J.F. Fernández, M.T. Blanco-Varela. Effect of BaCO3 reactivity and mixing procedure on sulfate-resistant cement performance. Cement and Concrete Composites 120 (2021) 104038.
• M. Fernández-Álvarez, F. Velasco, M. Torres-Carrasco, A. Bautista. Hindering the decrease in wear resistance of UV-exposed epoxy powder coatings by adding nano-SiO₂ through ball milling. Wear, 480-481, 203935 (2021).
• E. Batuecas, I. Ramón-Álvarez, S. Sánchez-Delgado, M. Torres-Carrasco. Carbon footprint and water use of alkali-activated and hybrid cement mortars, Journal of Cleaner Production, 319 (2021) 128653.
• S. Shagñay, A. Bautista, F. Velasco, M. Torres-Carrasco. Hybrid cements: Towards their use as alternative and durable materials against wear, Construction and Building Materials, 312, 20, (2021),
  125397 .

Año 2020

• M. Fernández-Álvarez, F. Velasco, A. Bautista, Y. González-García, B. Galiana, Corrosion Protection in Chloride Environments of Nanosilica Containing Epoxy Powder Coatings with Defects, Journal of The Electrochemical Society, 167 (2020) 161507.
• S. Shagñay, L. Ramón, M. Fernández-Álvarez, A. Bautista, F. Velasco, M. Torres-Carrasco, Eco-Efficient Hybrid Cements: Pozzolanic, Mechanical and Abrasion Properties, Applied Sciences 10 (2020) 8986.
• S. Shagñay, F. Velasco, A. del Campo, M. Torres-Carrasco, Wear behavior in pastes of alkali-activated materials: Influence of precursor and alkali solution, Tribology International 147 (2020) 106293.
• M. Fernández-Álvarez, F. Velasco, A. Bautista, B. Galiana, Functionalizing organic powder coatings with nanoparticles through ball milling for wear applications, Applied Surface Science 513 (2020) 145834.
• M. Fernández-Álvarez, F. Velasco, A. Bautista, Epoxy powder coatings hot mixed with nanoparticles to improve their abrasive wear, Wear (2020) 448-449, 203211.
• M. Fernández-Álvarez, F. Velasco, A. Bautista, J. Abenojar, Effect of silica nanoparticles on the curing kinetics and erosion wear of an epoxy powder coating, Journal of Materials Research and Technology (2020) 455-464.
• J. Abenojar, B. Enciso, M. Pantoja, F. Velasco, M.A. Martínez. “Thermal characterization and diffusivity of two mono-component epoxies for transformer insulation”. International Journal of Adhesion & Adhesives 103 (2020) 102726.
• M. Fernández-Álvarez, F. Velasco, A. Bautista, F. C. M. Lobo, E. M. Fernandes, R. L. Reis, «Manufacturing and characterization of coatings from polyamide powders functionalized with nanosilica«. Polymers 12 (2020) 2298.
• M. Bahrami, J. Abenojar, M. A. Martinez. Recent progress in hybrid biocomposites: mechanical properties improvement. Materials, 13/22 (2020) 5145.
• B. Enciso, J. Abenojar, M.A. Martinez. Effect of APPT treatment on mechanical properties and durability of green composites with woven flax. Materials 13 (2020) 4762.
• Abenojar, S. López de Armentia, A.Q. Barbosa, M.A. Martínez, F. Velasco, L.F.M. da Silva, J.C. del Real Romero. Magnetizing cork particles through a co-precipitated magnetite coating.  Wood Science and Techology, 54/4 (22-May-2020) 869–889.
• M.A. Martínez, S. López de Armentia, J. Abenojar. Influence of sample dimensions on single lap joints: effect of interactions between parameters. Journal of Adhesion (2020).
• Pedro Galvez, Sara Lopez de Armentia, Juana Abenojar and Miguel Angel Martinez. Effect of moisture and temperature on thermal and mechanical properties of structural polyurethane adhesive joints.  Composite Structures, 247.

Año 2019

• G. Monrrabal, A. Bautista, F. Velasco. Use of Innovative Gel Electrolytes for Electrochemical Corrosion Measurements on Carbon and Galvanized Steel Surfaces, Corrosion, 75 (2019) 1502-1512.
  
• A. Bautista, J.C. Pomares, M.N. González, F. Velasco. Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides. Construction and Building Materials, 229 (2019) 116899
• Bautista, A., Velasco, F., and Torres-Carrasco, M. Influence of the Alkaline Reserve of Chloride‐Contaminated Mortars on the 6‐Year Corrosion Behavior of Corrugated UNS S32304 and S32001 Stainless Steels (2019), Metals, 9, 686. 
• Gálvez, P., Abenojar, J., Martínez, M.A. Durability of steel-CFRP structural adhesive joints with polyurethane (2019) Composites Part B, 165, pp.1-9
• Nao-Aki Noda, Rei Takaki, Yunong Shen, Akane Inoue, Yoshikazu Sano, Daichi Akagi, Yasushi Takase, Pedro Gálvez. Strain Rate Concentration Factor for Flat Notched Specimen to Predict Impact Strength for Polymeric Materials (2019) Mechanics of Materials (in press).
• Monrrabal, G., Bautista, A., Guzman, S., Gutierrez, C., Velasco, F. Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces (2019) Journal of Materials Research and Technology, 8, pp. 1335-1346.
• Pantoja, M., Velasco, F., Abenojar, J., Martinez, M.A. Development of superhydrophobic coatings on AISI 304 austenitic stainless steel with different surface pretreatments. Thin Solid Films 617 (2019) 22-30
• Gálvez, P., Abenojar, J., Martinez, M.A. Effect of moisture and temperature on the thermal and mechanical properties of a ductile epoxy adhesive for use in steel structures reinforced with CFRP. Composites Part B 176 (2019) 107194
• Paz, E., Ballesteros, Y., Abenojar, J., del Real, J.C., Dunne, N. Graphene Oxide and Graphene Reinforced Bone Cements – Evaluation of Thermal Properties and Biocompatibility. Materials, 12 (2019) 3146 
• Lopez de Armentia, S., Enciso, B., Mokry, G., Abenojar, J.,  Martinez, M.A. Novel application of a thermoplastic composite with improved matrix-fiber interface. Journal of Materials Research and Technology (in press-online 2019) 
• Piqueras-Pérez, A., Martínez-Casanova, M.A., Abenojar, J., Marulanda-Arévalo, J.L. Characterization a polyurethane-based reactive hot melt adhesive for applications in materials. Revista DYNA, 86/210 (2019) pp 247-253.
• B. Enciso, J. Abenojar; G. M. Aparicio; M. A. Martínez.  Decomposition kinetics and lifetime estimation of natural fibres reinforced composites. Influence of plasma treatment and fibre type. Journal of Industrial Textiles. 

Año 2018

• Fernández-Álvarez, M., Velasco, F., Bautista, A. Effect on wear resistance of nanoparticles addition to a powder polyester coating through ball milling (2018) Journal of Coatings Technology and Research, 15 (4), pp. 771-779.
• Monrrabal, G., Ramírez-Barat, B., Bautista, A., Velasco, F., Cano, E. Non-destructive electrochemical testing for stainless-steel components with complex geometry using innovative gel electrolytes (2018) Metals, 8 (7), art. no. 500, .
• Ureña, J., Tejado, E., Pastor, J.Y., Velasco, F., Tsipas, S., Jiménez-Morales, A., Gordo, E. Role of beta-stabilizing elements on the microstructure and mechanical properties evolution of modified PM Ti surfaces designed for biomedical applications (2018) Powder Metallurgy, 61 (2), pp. 90-99.
• Monrrabal, G., Huet, F., Bautista, A. Electrochemical noise measurements on stainless steel using a gelled electroyte (2018) Corrosion Science, 148, pp 48-56.
• López de Armentia, S., Pantoja, M., Abenojar, J. and Martínez, M.A. Development of Silane-Based Coatings with Zirconia Nanoparticles Combining Wetting, Tribological, and Aesthetical Properties (2018), Coatings, 8, 368.
• Martínez, M.A., Abenojar, J and López de Armentia, S., Environmentally Friendly Plasma Activation of Acrylonitrile–Butadiene–Styrene and Polydimethylsiloxane Surfaces to Improve Paint Adhesion, (2018), Coatings, 8, 428.
• Enciso, B., Abenojar, J., Paz, E., Martínez, M.A. Influence of low pressure plasma treatment on the durability of thermoplastic composites LDPE-flax/coconut under thermal and humidity conditions. Fibers and Polymers (2018), 19.
• Enciso, B., Paz, E., Trujillo, C., Abenojar, J., Martínez, M.A. Durability of Steel joints with ductile adhesives subjected to fatigue tests. Mechanical Engineering (2018)

Año 2017

• Martínez, M.A., Abenojar, J., Enciso, B., Velasco, F.J. Effect of atmospheric plasma torch on ballistic woven aramid (2017) Textile Research Journal, 87 (19), pp. 2358-2367.
• Gálvez, P., Quesada, A., Martínez, M.A., Abenojar, J., Boada, M.J., and Díaz, V. Study of the behaviour of adhesive joints of steel with CFRP for its application in bus structures (2017), Composites Part B, 129, pp. 1-46.
• Enciso, B., Abenojar, J., Martínez, M.A. Influence of plasma treatment on the adhesion between a polymeric matrix and natural fibres. Cellulose (2017), 24, 1791-1801.

Año 2016

• Monrrabal, G., Guzmán, S., Hamilton, I.E., Bautista, A., Velasco, F. Design of gel electrolytes for electrochemical studies on metal surfaces with complex geometry (2016) Electrochimica Acta, 220, pp. 20-28.
• Paredes, E.C., Bautista, A., Velasco, F., Álvarez, S.M. Welded, pickled stainless steel reinforcements: Corrosion results after 9 years in mortar (2016) Magazine of Concrete Research, 68 (21), pp. 1099-1109.
• Chiminelli, A., Breto, R., Jiménez, M.A., Velasco, F., Abenojar, J., Martínez, M.A. Experimental method for the determination of material parameters of plasticity models for toughened adhesives (2016) International Journal of Adhesion and Adhesives, 68, pp. 182-187.
• Pantoja, M., Abenojar, J., Martínez, M.A., Velasco, F. Silane pretreatment of electrogalvanized steels: Effect on adhesive properties (2016) International Journal of Adhesion and Adhesives, 65, pp. 54-62.
• Bautista, A., Paredes, E.C., Alvarez, S.M., Velasco, F. Welded, sandblasted, stainless steel corrugated bars in non-carbonated and carbonated mortars: A 9-year corrosion study (2016) Corrosion Science, 102, pp. 363-372.

Año 2015

• Bautista, A., Alvarez, S.M., Paredes, E.C., Velasco, F., Guzman, S. Corrugated stainless steels embedded in carbonated mortars with and without chlorides: 9-Year corrosion results (2015) Construction and Building Materials, 95, pp. 186-196.
• Bautista, A., Paredes, E.C., Velasco, F., Alvarez, S.M. Corrugated stainless steels embedded in mortar for 9 years: Corrosion results of non-carbonated, chloride-contaminated samples (2015) Construction and Building Materials, 93, art. no. 6743, pp. 350-359.
• Bautista, A., Alvarez, S.M., Velasco, F. Selective corrosion of duplex stainless steel bars in acid. Part 2: Effect of the surface strain and numerical analysis (2015) Materials and Corrosion, 66 (4), pp. 357-365.
• Bautista, A., Alvarez, S.M., Velasco, F. Selective corrosion of duplex stainless steel bars in acid. Part 1: Effect of the composition, microstructure and anodic polarizations (2015) Materials and Corrosion, 66 (4), pp. 347-356.
• Martinez, M.A., Velasco, F., Abenojar, J., Chiminelli, A., Breto, R. Evaluation of adhesion improvement of a GFRP treated with atmospheric plasma torch (2015) Journal of Adhesion, 91 (12), pp. 937-949.

Año 2014

• García, G.L., López-Ríos, V., Espinosa, A., Abenojar, J., Velasco, F., Toro, A. Cavitation resistance of epoxy-based multilayer coatings: Surface damage and crack growth kinetics during the incubation stage (2014) Wear, 316 (1-2), pp. 124-132.
• Abenojar, J., Martínez, M.A., Velasco, F., Rodríguez-Pérez, M.A. Atmospheric plasma torch treatment of polyethylene/boron composites: Effect on thermal stability (2014) Surface and Coatings Technology, 239, pp. 70-77.
• Abenojar, J., Bautista, A., Guzmán, S., Velasco, F., Martínez, M.A. Microstructural influence on corrosion properties of aluminium composites reinforced with amorphous iron borides (2014) Materials and Corrosion, 65 (7), pp. 678-684.

Publicaciones fuera del JCR

• J. Abenojar, S. López de Armentia, P. Gálvez, M.A. Martínez, Tribological and Mechanical Properties of Polyester Based Composites with SiC Particles, Lecture Notes in Mechanical Engineering 70 (2019) 789-795 DOI:10.1007/978-981-13-0411-8_70
• B. Enciso, E. Paz, C. Trujillo, J. Abenojar and M.A. Martínez, Durability of steel joints with ductile adhesive subjected to fatigue tests, Lecture Notes in Mechanical Engineering 40 (2019) 458-463 DOI: 10.1007/978-981-13-0411-8_40.
• Enciso, B., López de Armentia, S., Abenojar, J., and Martínez, M.A. Influencia del tratamiento superficial en la resistencia y adhesión entre fibras naturales de lino y una matriz termoplástica (2018), Materiales Compuestos Journal, Vol.2, (3), pp.40-43.
• Martínez, M.A., Abenojar, J., Enciso, B., and López de Armentia, S., Infiltration behaviour of liquids over fibres or woven (2018), IOP Conference Series: Materials Science and Engineering, 369, 012012 .
• J Abenojar, J C del Real, Y Ballesteros and M A Martinez, Kinetics of curing process in carbon/epoxy nano-composites, Journal of Physics: IOP Conf. Ser.: Mater. Sci. Eng. 369 012011 (2018).
• Abenojar, J., Enciso, B., Martínez, M.A., Velasco, F. Wear resistance of polypropylene-SiC composite (2017) Journal of Physics: Conference Series, 843 (1), art. no. 012066.
• Martínez, M.A., Abenojar, J., Pantoja, M., and López de Armentia, S.,
  Wear resistance of hydrophobic surfaces (2017), Journal of Physics: Conference Series, 012067.
• Gálvez, P., Carbas, RJC., Campilho, RDSG., Abenojar, J., Martínez, M.A., and da Silva. LFMFracture toughness in Mode I (GIC) for ductile adhesives (2017), 6th International Conference on Fracture Fatigue and Wear, IOP Conf. Series: Journal of Physics: Conf. Series 843.
• A. Q. Barbosa, L. F. M. da Silva, J. Abenojar and M. Figueiredo. Analysis of the effect of size, amount and surface treatment on the tensile strain of a brittle adhesive reinforced with micro cork particles. Applied Adhesion Science, 5:9 (2017) 2-16 DOI 10.1186/s40563-017-0088-6
• Bautista, A., Velasco, F., Alvarez, S.M., Paredes, E.C. Durability of reinforcing stainless steel ribbed bars in carbonated mortars (2015) 8th European Stainless Steel and Duplex Stainless Steel Conference 2015, pp. 256-264.
• M.A. Martinez, J. Abenojar, N. Encinas, Polyolefinic Surface Activation by Low and Atmospheric Pressure Plasma Treatments (2015) Materials Science Forum, 805, pp. 149-154. doi: 10.4028/www.scientific.net/MSF.805.149
• Abenojar, J., Martínez, M.A., Criado, A.J., Velasco, F. Effect of sintering temperature on the formation of intermetallics in Al- Fe-B nanocomposite (2014) Materials Science Forum, 802, pp. 130-134.
• Martinez, M.A., Velasco, F., Abenojar, J. Behaviour of fluids in porous materials (2014) Materials Science Forum, 802, pp. 303-308.
• P. Sanz-Ruiz, E. Paz, J. Abenojar, J.C. del Real, F. Forriol y J. Vaquero. Influencia del medio fisiológico sobre las propiedades mecánicas del cemento óseo. ¿Son los estudios actuales extrapolables? Influence of the physiological medium on the mechanical properties of bone cement: Can current studies be extrapolated? Revista Espanola de Cirugia Ortopedica y Traumatologia, 58(1) (January–February 2014), 3-10 DOI:10.1016/j.recot.2013.09.005.